A 5,000 m² epoxy-coated production floor that had to be swept and washed by hand twice a day: the Gausium Ecobot 50 Pro now sweeps and scrubs it automatically, on schedule.
The challenge
- A 5,000 m² production zone needed complete cleaning twice a day, before operations and at the end of the working day.
- The epoxy-coated cement floor had to be both swept and washed to meet hygiene and safety requirements.
- All cleaning was manual and took employees away from higher-value tasks.
- As the facility grew, the time and cost of manual cleaning became harder to justify.
- Client
- Romanian plant of a global industrial group, in Romania since 2003, automotive components and industrial connectors
- Industry
- Automotive – component assembly and industrial connectors
- Country
- Romania
- Solution
- Gausium Ecobot 50 Pro autonomous cleaning robot
- Scope
- 5,000 m² production zone
The solution
- Robot Industries implemented the Gausium Ecobot 50 Pro, an autonomous robot built for large industrial spaces.
- It sweeps and scrubs the epoxy floor in a single pass.
- Intelligent navigation and route optimisation adapt it to the layout of the production area.
- Pre-programmed cycles run twice a day, and quiet operation allows cleaning during working hours.
Before and after
| Before | With Gausium Ecobot 50 Pro | |
|---|---|---|
| Cleaning method | Manual sweeping and washing | Automatic sweeping and scrubbing in one pass |
| Schedule | Dependent on available staff | Two programmed cycles a day |
| Result | Variable across 5,000 m² | Uniform, including high-traffic areas |
| Staff | Diverted to routine cleaning | Focused on production and quality checks |
Do you have a similar challenge?
Tell us the size of your production area, the floor type and how often it must be cleaned. A Robot Industries specialist will recommend the right robot and send you an offer.
Write to us on WhatsAppGet your offer in 3 steps
10 years of experience · Your data is never shared.
Frequently asked questions
Can one robot sweep and wash an industrial floor?
Yes. In this project the Gausium Ecobot 50 Pro sweeps and scrubs the epoxy-coated cement floor in a single pass.
Can it clean during working hours?
Yes. It operates quietly and navigates around the production layout, so it can run while people are working.
What is included?
Delivery, installation and configuration on site, team training and technical support.
How do I find out the price?
The price depends on the configuration and on your application. Send us a request and we will send you an offer.
and then Add to Home Screen.
5,000 m² production floor cleaned automatically twice a day at an automotive supplier