Skip to Content
You may also like this products
My Cart
Robot Industries · 10 years in industrial robotics

UV disinfection robots for hospitals, clinics and public buildings.

Disinfection robots that free hospital staff for patients.

Autonomous UV-C disinfection for every room in your clinic.

Spray disinfection robots for air and surfaces.

Disinfection robots for offices, schools and public spaces.

Robot Industries autonomous disinfection robots treat rooms with UV-C light or a fine disinfectant mist, on their own route and on your schedule. Every cycle is recorded. We deliver, configure, train your team and support you technically.

  • UV-C and spray disinfection, in single or cycle mode
  • Autonomous navigation with 360° obstacle avoidance
  • Every cycle recorded for traceability

Get your quote in 3 steps

Where will the robot disinfect?
Which method do you prefer?
Where should we send your quote?

10 years of experience · Your data is never shared.

Fast worldwide delivery
Installation and integration
Training for your team
Technical support
The problem

Manual disinfection takes hours and is hard to prove.

Staff time lost

Nurses and cleaning teams spend hours disinfecting rooms instead of caring for patients.

Uneven coverage

By hand, how thoroughly a room is treated depends on the person and the day.

No records

Without automatic logs, it is hard to show when and how each room was disinfected.

An autonomous disinfection robot follows the same programmed route every time, covers the room 360° and records each cycle, while your team focuses on patients.

The cost

What manual disinfection really costs

Hours taken from care

In the hospital case below, robots cut disinfection time by 25–30% compared with manual work. That time goes back to patients.

Rooms kept closed

Every extra minute of disinfection keeps a room or ward out of use for longer.

Audit risk

When cycles are not documented, it is hard to prove disinfection to inspectors and patients.

The solution

Two disinfection methods, one autonomous robot range

RI11U UVC autonomous disinfection robotRI11A spray disinfection robotRI M2 disinfection robot with UV and sprayRI13U UVC disinfection robotDisinfection robot in a hospital corridor
Who we are

Robot Industries: 10 years of putting robots to work

We design, deliver and integrate robotic solutions for industry – from welding and palletizing to logistics and cleaning. Every project comes with installation, training and technical support, wherever you are.

  • Pioneer of robotic applications
  • Own Robot Industries product range
  • Fast worldwide delivery
0years of experience
0robots working every day
0+customers
Case studies

Results at our customers

25–30%less disinfection time
Healthcare · Romania

Public hospital with 8 departments on 5 sites

Challenge
Rooms in 8 departments across 5 sites were disinfected by hand: slow, labour-intensive and hard to verify.
Solution
15 autonomous robots with UV-C light and disinfectant spray, 360° coverage, programmed to enter rooms and pavilions on their own.
Result
Disinfection time down 25–30%, more staff time for patients, and the parameters of every cycle recorded automatically.
Read the case study →
Our robots

Choose the right robot

RI11U UVC Disinfection Robot

RI11U UVC Disinfection Robot

Autonomous UV-C disinfection for hospitals, clinics and offices.

  • 2.5–3 h
  • 49 kg
  • Single or cycle
See the robot →
RI13U UVC Disinfection Robot

RI13U UVC Disinfection Robot

A 1,536 mm tall UV-C robot with single or cycle disinfection.

  • 2.5–3 h
  • 49 kg
  • 1,536 mm
See the robot →
RI11A Spray Disinfection Robot

RI11A Spray Disinfection Robot

Autonomous spray disinfection of air and surfaces.

  • 5–6 h
  • 13 L tank
  • 47 kg
See the robot →
RI11A0 Spray Disinfection Robot

RI11A0 Spray Disinfection Robot

A compact spray robot for single or cycle disinfection.

  • 3–4 h
  • 16 L tank
  • 42 kg
See the robot →
RI M2 Disinfection Robot

RI M2 Disinfection Robot

UV and spray in one robot; the manufacturer specifies a 99.9% kill rate for airborne bacteria.

  • 12 h
  • 60 kg
  • Docking station
See the robot →

Not sure which robot fits? Tell us where it will work and we'll recommend one. Request a quote →

Reduced risk

A project you can control

Safe UV-C use

UV-C runs only in empty rooms: the robot disinfects when no one is inside.

Set up for your building

We map your rooms, set routes and schedules, and test them with your team.

Training and support

Your staff learn to start, schedule and check cycles, and we stay with you for technical support.

How we work

From first call to a robot at work

Technical call

Tell us where the robot will work and what it should do.

Tailored quote

You get the right configuration and an offer.

Delivery and setup

We install and configure the robot on site, on a timeline agreed with you.

Training and support

Your team learns to use it, and we stay with you for technical support.

FAQ

Questions before you decide

What is a UV disinfection robot?

A UV disinfection robot is an autonomous mobile robot that moves through empty rooms and exposes surfaces to UV-C light, which inactivates bacteria and viruses. It follows a programmed route, avoids obstacles and records every cycle. Robot Industries also supplies spray models that disinfect both air and surfaces with a fine mist.

Who is Robot Industries?

A company specialised in robotic applications for industry, with 10 years of experience and more than 1,000 customers. We deliver our own Robot Industries solutions, with installation, training and technical support.

How much does a disinfection robot cost?

It depends on the model, the method and the number of rooms. Tell us what you need and get a quote.

UV-C or spray: which should I choose?

UV-C suits surfaces in empty rooms. Spray treats air and surfaces with a fine mist. RI M2 combines both. Tell us about your rooms and we will recommend a model.

Is UV-C disinfection safe?

UV-C is used in empty rooms: the robot disinfects when no one is inside.

How long does a robot run on one charge?

According to the product specifications, from 2.5–3 hours for the UVC models to 5–6 hours for RI11A and 12 hours for RI M2.

Can I prove that a room was disinfected?

Yes. The robot records the parameters of each cycle automatically, so every disinfection is traceable.

What happens after delivery?

We install, integrate, train your team and provide technical support.

Tell us which rooms you need to disinfect. We'll send your quote.

10 years of experience and one team that installs, trains and supports you – wherever you are.

To install this Web App in your iPhone/iPad press and then Add to Home Screen.