RI CleanX R3: 5-in-1 AI Cleaning Robot with Docking Station
The robot that scrubs, vacuums, sweeps and dust-mops floors on its own – day and night, no operator needed.
- 400–700 m²/h
- up to 18 h
- 490 mm
- below 65 dB
Consistent cleaning standards at a lower operating cost.
CleanX R3 takes over daily floor cleaning: it scrubs, vacuums, sweeps and dust-mops. It plans its own route, returns to its station, empties and refills itself. Your team focuses on what matters.
Manual cleaning costs you more than you think
Large areas, night shifts, staff that is hard to find and results that change from day to day. CleanX R3 solves exactly these problems.
Staff is hard to find
Cleaning is repetitive work with high turnover. The robot works every day, with no holidays and no missed shifts.
Inconsistent results
Everyone cleans differently. The robot follows the same route, with the same pressure and the same amount of water, every time.
Cleans when the space is empty
Schedule cleaning at night or between shifts. In the morning the floor is clean and dry, without disturbing anyone.
Up to 700 m² cleaned per hour, no operator required.
Scrubs, vacuums, sweeps and dust-mops
No more separate scrubber, vacuum and sweeper. CleanX R3 switches between functions with one touch or automatically, on schedule.
- Vacuuming and sweeping for dust and debris
- Scrubbing with clean water from the 8 L tank
- Noise level below 65 dB
Knows which floor it is on
It recognises carpet and hard floors by itself and switches cleaning mode. Works on marble, tiles, granite, epoxy, artificial stone and short-pile carpet.
- No manual settings between rooms
- Keeps carpets dry
- 490 mm cleaning width
Sees people and obstacles
Visual SLAM and Laser SLAM navigation, plus sensors that detect people, furniture and objects on the floor. It goes around, slows down or stops in time.
- Works safely around staff and customers
- Under 65 dB: no disturbance even during opening hours
Returns to its station by itself
When the job is done or the battery is low, it drives to the docking station. There it recharges, drains the waste water and refills clean water, then carries on.
- Full charge in 2 hours
- 25 L buffer tanks in the station
- Long-life lithium iron phosphate batteries
Friendly to the people around it
The screen shows expressions and work status, so everyone can see what the robot is doing. Monitor it remotely over Wi-Fi or 4G.
Built for spaces that cannot afford to be dirty
Offices and headquarters
Cleans open spaces, hallways and meeting rooms after hours. Staff arrive to a clean office every morning.
No after-hours cleaning crew needed
Factories and production areas
Keeps aisles and common areas clean between shifts. Removes dust and debris from the floor and reduces the risk of slips.
Cleaning between shifts, without stoppages
Warehouses and logistics centres
Large areas, cleaned consistently: 400–700 m² per hour, with planned routes and automatic return to the station.
Large areas covered every day
Shopping centres and retail
Works quietly among shoppers and steers around them. Its expressive screen draws attention and gives the store a modern image.
Clean floors all day long
Hotels, hospitals and public buildings
Lobbies, receptions and corridors clean at any hour. Consistent, documented, easy-to-check cleaning where hygiene matters most.
Consistent hygiene, day and nightUp and running in 4 simple steps
Mapping
The robot learns the space once and builds a map of the area.
Scheduling
Choose areas, functions and times in a simple interface, no code needed.
Autonomous cleaning
It starts on time by itself and avoids obstacles.
Back to the station
It recharges, empties and refills, ready for the next round.
Manual cleaning or CleanX R3?
| Manual cleaning | CleanX R3 | |
|---|---|---|
| Working hours | Shifts, breaks, holidays | Day and night, on schedule |
| Quality | Varies from person to person | Same route, every time |
| Equipment | Scrubber, vacuum, mop | 5 functions in one robot |
| Water and emptying | By hand, several times a day | Automatic, at the station |
| Reporting | Hard to check | Status visible remotely |
Technical specifications
| Cleaning efficiency | 400–700 m²/h |
|---|---|
| Runtime | 5 h scrubbing · 5 h vacuuming · 18 h sweeping · 10 h dust-mopping |
| Cleaning width | 490 mm |
| Clean / waste water tank | 8 L / 6 L |
| Charging time | 2 h |
| Dimensions (L × W × H) | 580 × 500 × 600 mm |
|---|---|
| Weight | 53.8 kg |
| Docking station | Charging, clean water, waste water, 25 L + 25 L buffer tanks |
| Power | 600 W |
| Navigation | Visual SLAM / Laser SLAM |
|---|---|
| Noise level | below 65 dB |
| Connectivity | Wi-Fi, 4G |
| Battery | Lithium iron phosphate (LFP) |
What customers ask us
How much does CleanX R3 cost?
The offer depends on the area to clean and the number of robots you need. Send a request and we will send you an offer.
Do I need someone to program it?
No. The robot maps the area once and the schedule is set in a simple interface, no code needed. We help you with commissioning.
Is it safe around people?
Yes. Sensors detect people and obstacles, and the robot steers around them or stops. Noise stays under 65 dB.
How long does it run on one charge?
Up to 5 hours scrubbing or vacuuming and up to 18 hours sweeping. A full charge takes about 2 hours.
Which floor types does it handle?
Marble, tiles, granite, epoxy, artificial stone, wood and short-pile carpet. It recognises carpet by itself and switches cleaning mode. If your floor is not listed, send a request or message us on WhatsApp and an RI colleague will confirm compatibility.
Want to see how much you could save with CleanX R3?
Tell us the size and type of your space and we will send you an offer and a proposal for organising the cleaning.
Request a quote for the CleanX R3
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
