Skip to Content
You may also like this products
My Cart
Robot Industries · 10 years in industrial robotics

Pick and place robots that keep your line moving.

A cobot that picks and places parts next to your operators.

Vision-guided picking for parts that are never in the same place.

Robotic pick and place for packing and sorting.

Pick and place automation for electronics and small parts.

Robot Industries builds pick and place stations with collaborative robots, grippers, sensors and vision. The cobot moves parts from conveyor to machine, tray or box, cycle after cycle. We integrate it into your line, train your team and support you technically.

  • Collaborative robots from 3 to 25 kg payload
  • 2D and 3D vision for parts in random positions
  • Integrated into your existing line

Get your quote in 3 steps

What will the robot pick?
Where does the part come from?
Where should we send your quote?

10 years of experience · Your data is never shared.

Fast worldwide delivery
Installation and integration
Training for your team
Technical support
The problem

Your operators spend the shift moving the same part.

Repetitive, tiring work

Picking each part from a conveyor and placing it in a machine, cycle after cycle, wears people out.

Unstable pace

Fatigue slows the cycle and makes quality vary from one shift to the next.

Hard to staff

Few people want to repeat the same motion for a whole shift, and skilled staff are needed elsewhere.

A pick and place cobot takes over the repetitive move at a steady cycle time, while your operators supervise, program and check quality.

The cost

What manual handling costs you

Longer cycle time

In the electronics case below, manual handling lengthened the cycle until a cobot took over and reached the required time.

Quality that varies

Inconsistent picking and placing turns into rework and scrap.

Safety and fatigue

Repeated motions and exposure to heat or hazardous substances raise the risk of injury.

The solution

A complete pick and place station, not just a robot arm

Collaborative robot picking partsRobot Industries 3D AI vision systemPick and place station with sensorsJAKA Zu 5 collaborative robotRI Collaborative Robot series
Who we are

Robot Industries: 10 years of putting robots to work

We design, deliver and integrate robotic solutions for industry – from welding and palletizing to logistics and cleaning. Every project comes with installation, training and technical support, wherever you are.

  • Pioneer of robotic applications
  • Own Robot Industries product range
  • Fast worldwide delivery
0years of experience
0robots working every day
0+customers
Case studies

Results at our customers

50%robot capacity used at the required cycle time
Electronics · Romania

Global electronic components maker

Challenge
An operator picked every component from a conveyor and placed it in a processing machine, cycle after cycle.
Solution
A JAKA Zu5 cobot (5 kg payload, 954 mm reach) with a dedicated gripper, presence sensors and a pedestal that reaches both conveyor and machine.
Result
The required cycle time is reached at about 50% of the robot's capacity, with room to grow and less repetitive work for operators.
Read the case study →
3 shiftsof 8 hours, now handled by the cobot
Automotive interiors

Premium automotive interior supplier

Challenge
Operators repeated the same hot-air finishing motion on three 8-hour shifts, with fatigue and uneven quality.
Solution
A 5-axis collaborative robot with a 3 kg payload and 700 mm reach, integrated into the existing line.
Result
Operator exposure to hot air eliminated and repeatable quality on every shift.
Read the case study →
Turnkeyrobotic cell, delivered and integrated
Automotive plastics · Italy

Plastic components maker for automotive and energy

Challenge
Surfaces were prepared by hand before painting: slow, tiring and risky work, with uneven results.
Solution
A turnkey robotic cell with a collaborative arm, built for dry-ice blasting of plastic parts.
Result
Higher productivity, stable quality and no one exposed to the risky task. Staff moved to preparing production and programming the cell.
Read the case study →
Our solutions

Choose the right solution

JAKA Zu 5 Collaborative Robot

JAKA Zu 5 Collaborative Robot

The cobot used in our electronics pick and place project.

  • 5 kg
  • 954 mm
  • Collaborative
See the product →
JAKA Ai 5 Collaborative Robot

JAKA Ai 5 Collaborative Robot

A cobot with vision and a 2D camera included, for vision-guided picking.

  • Vision included
  • 2D camera
See the product →
RI Collaborative Robot series

RI Collaborative Robot series

Cobots for your own cell: tending, packing, assembly.

  • 3–25 kg
  • 600–1,800 mm
  • IP54
See the product →
Robot Industries 3D AI vision system

Robot Industries 3D AI vision system

3D vision that locates parts so the robot can pick them.

  • 5 MP
  • 3D
  • AI
See the product →

Not sure which fits? Tell us your parts and cycle time and we'll recommend one. Request a quote →

Reduced risk

A project you can control

Capacity in reserve

In the electronics case, the cobot works at about 50% of its capacity, so throughput can grow.

Fits your existing line

Our cobots have been integrated into lines that were already running, without disrupting production.

Training and support

Your team learns to program and adjust the station, and we stay with you for technical support.

How we work

From first call to a station at work

Technical call

Tell us which part you move, from where to where and at what cycle time.

Tailored quote

You get the right configuration and an offer.

Delivery and integration

We integrate the station into your line, on a timeline agreed with you.

Training and support

Your team learns to use it, and we stay with you for technical support.

FAQ

Questions before you decide

What is a pick and place robot?

A pick and place robot is a robot arm that picks parts or products from one place, such as a conveyor, tray or machine, and places them in another at a steady cycle time. With grippers, sensors and vision, a collaborative pick and place robot can work next to people and handle parts in changing positions.

Who is Robot Industries?

A company specialised in robotic applications for industry, with 10 years of experience and more than 1,000 customers. We deliver our own Robot Industries solutions, with installation, training and technical support.

How much does a pick and place robot cost?

It depends on the robot, the gripper, the vision system and the integration. Tell us about your parts and get a quote.

Do I need vision for pick and place?

Not always. If parts arrive in a fixed position, sensors are enough. If they arrive in random positions, 2D or 3D vision locates them before picking.

Can a cobot work next to my operators?

Yes, after a risk assessment of your layout. Collaborative robots are compact and designed to work alongside people.

Can it be added to an existing line?

Yes. In our projects, cobots were integrated directly into lines that were already running.

Can the station run faster later?

In the electronics case, the cobot reaches the required cycle time at about 50% of its capacity, so there is room for higher throughput.

What happens after delivery?

We install, integrate, train your team and provide technical support.

Tell us what you need to pick and place. We'll send your quote.

10 years of experience and one team that installs, trains and supports you – wherever you are.

To install this Web App in your iPhone/iPad press and then Add to Home Screen.