RI WD Trolley Welding Station: Mobile Cobot Welding
Roll the cobot to the workpiece and weld large parts on site – no fixed cell, no programmer.
- Mobile station
- 240 kg
- MIG/MAG 350/500 A
- ±0.03 mm
International delivery · Installation, training and technical support
Robotic welding brought to the workpiece, anywhere on the shop floor.
RI WD Trolley combines a cobot, welding power source and wire feeder on a compact trolley. The wire feeder has a 5 m cable as standard, up to 9 m on request.
Large projects, limited skilled labour, firm deadlines
Demand for steel structures keeps rising, while skilled welders are increasingly hard to recruit.
Skilled welders are scarce
Every project waits for the same few people.
Big parts don't fit in a cell
Beams and frames are too large to move into a fixed robot cell.
The robot is brought to the part
Roll the trolley next to the workpiece and the cobot welds on the spot.
Full flexibility in the workshop and on site
Mobility on large parts
The wire feeder, with a 5 m cable as standard (up to 9 m on request), lets you move the trolley along large parts without moving the welding power source.
- Built for steel structures
- Customisable size
Move it in minutes
240 kg with the gas cylinder, on wheels; it even fits in a van to go to another site.
- Quick changes of work position
- Works where floor space is limited
No programmer needed
Intuitive interface and visual positioning with real-time path simulation.
- Straight, corner and diagonal seams
- Saved welding parameters
The same weld, every time
±0.03 mm repeatability and multi-layer, multi-pass welding.
- Circumferential, weaving, intermittent, fillet
Lower investment, safe operation
No enclosure and no extra panels – only what is needed to weld. Collision sensors stop the arm when needed.
- IP54 protection
- Cobot: RI or JAKA
Designed for large-scale steel structures
Steel structures
Branch welding on steel structure lines: beams, columns, frames.
Long seams without moving the part
Bridges and heavy fabrication
Laminated welding for bridge steel structures and other heavy parts.
Consistent multi-pass seamsLight steel and tube frames
Light steel production lines and tube frames, with fast changeover between tasks.
Fast changeover between parts
Job shops and small batches
Small and medium shops where every week brings different parts.
One robot for many jobsUp and running in 4 simple steps
Position the station
Roll it to the part or place the part on the table.
Teach the seam
Guide the torch by hand or use visual positioning; the path is simulated in real time.
Set parameters
Choose the welding mode and save the parameters for this part.
Weld and repeat
The cobot welds; the next identical part uses the same program.
Manual welding or RI WD Trolley?
| Manual welding | RI WD Trolley | |
|---|---|---|
| Availability | Depends on scarce skilled welders | Available on every shift |
| Seam quality | Varies from welder to welder | Repeatable to ±0.03 mm |
| Repeat parts | Every part welded from scratch | Saved program, same result |
| Programming | — | No code, visual positioning |
| Safety | Fumes and fatigue for the welder | Operator supervises; sensors stop the arm |
| Large parts | Parts moved to the welder | Take the robot to the part |
Technical specifications
| Working radius | wire feeder with 5 m cable (up to 9 m on request) |
|---|---|
| Arm reach options | 600 / 900 / 1300 / 1400 mm |
| Repeatability | ±0.03 mm |
| Welding modes | Autonomous planning, circumferential, weaving, intermittent, fillet, multi-layer multi-pass |
| Wire feeder | 5 m cable |
| Welding system | MIG/MAG 350 A / 500 A |
|---|
| Weight | 240 kg (with gas cylinder) |
|---|---|
| Protection | IP54 |
| Safety | Laser radar, infrared and force sensors; automatic rebound and instant stop |
Which station fits you?
| RI WD Trolley | RI WD V2 | |
|---|---|---|
| Format | Minimalist trolley | Station with integrated welding table |
| Ideal for | Large workpieces and steel structures | Repeat parts in series |
| Working reach | Arm 600–1400 mm | Arm 600–1400 mm |
| Welding processes | MIG/MAG 350 / 500 A | MIG/MAG 350 / 500 A · Laser 1.5–3 kW |
| Cobot | RI or JAKA cobot | RI or JAKA cobot |
| Mobility | 240 kg on wheels, fits in a van | Stable station with work table |
| Safety | Collision sensors · IP54 | Collision sensors · IP54 |
| You are here | See this station → |
What customers ask us
How much does the RI WD Trolley cost?
The price depends on the configuration: cobot, welding source and options. Send us your part or drawing and we reply with an offer.
Do I need a robot programmer?
No. The interface is intuitive: you guide the torch or use visual positioning, and the path is simulated before welding. We train your team.
Is it safe next to people?
Yes. Laser radar, infrared and force sensors detect collisions in real time; the arm rebounds or stops instantly.
How far can it reach?
You roll the trolley next to the part. The wire feeder has a 5 m cable as standard, up to 9 m on request, and the cobot welds within its arm reach.
Can I move it between sites?
Yes. It weighs 240 kg with the cylinder, runs on wheels and fits in a van.
Do you deliver and install abroad?
Yes. We deliver internationally and provide technical support and integration with your production.
Can I test it on my parts?
Send us a drawing or a sample; we check the seams and recommend the right setup.
Have large parts waiting for a welder?
Send us a drawing or a photo and we will tell you if the Trolley fits and send an offer.
Request a quote for the RI WD Trolley
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
